Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Tail light

Replacing the rear headlamp on a Fiat Punto is a straightforward task that can be done in the comfort of your own garage. Follow this tutorial to learn what to do. Start by opening the boot of the Punto, then unscrew the two Torx screws of the headlamp. Move the boot lining to access the socket at the back. Completely unscrew the two screws and remove the headlamp; you can simply pull it out by hand. After removing the headlamp, disconnect the bulb holder or connector and take out the bulb. Insert the new bulb and reassemble everything.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
How to Replace the Front Headlamp Bulb on a Fiat Punto?
How to Replace the Front Headlamp Bulb on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp bulb on a Fiat Punto, open the bonnet to access the components inside the engine bay. Locate the protective cover of th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos