Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Thermostat

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Thermostat

The thermostat is located on the side of the engine, just below the distributor. To replace it, it is advisable to perform the repair when the engine is cold, starting by draining the coolant by disconnecting the hose at the base of the radiator. Once the cooling system is drained, remove the battery and its tray to gain easier access to the thermostat housing. Disconnect the hose and unscrew the fastening bolts of the thermostat to install the new one. Then, flush the system and refill it with a ready-to-use antifreeze mixture.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Fiat Punto 2 Series 8v
How to Replace the Thermostat on a Fiat Punto 2 Series 8v
Fiat Punto (1999-2011 / MK 2, 188) When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly und…
Disassembly of the Fiat Punto thermostatic valve
Disassembly of the Fiat Punto thermostatic valve
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In today's video tutorial we will see how to disassemble the thermostatic valve of a Fiat Punto. First we lift the car and open the vent with a 13 mm…
How to Change the Thermostat on the Fiat Punto 1400
How to Change the Thermostat on the Fiat Punto 1400
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) The thermostat activates the exchange between the hot liquid in the engine and the cooler liquid contained within the radiator, which has been cooled…

Other guides you may be interested in

How to Replace the Pollen Filter on a Jeep Renegade

How to replace the pollen filter on a Jeep Renegade? Unscrew the screws located on the right side of the dashboard, then remove the glove compartment (as shown in the video). Using a screwdriver or cordless drill, remove the metal bar and the cover from the filter housing, then extract the worn cabin filter. Insert a new cabin filter ensuring it fits snugly around the walls of the housing, reattach the housing cover and tighten the screws (cover everything with the cloth placed under the dashboard). Check the correct installation of the previously mounted parts.

Watch the video!


by ScegliAuto

More videos