Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Thermostat on the Fiat Punto 1400

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Thermostat

The thermostat activates the exchange between the hot liquid in the engine and the cooler liquid contained within the radiator, which has been cooled by the fan. Inside the thermostat, there is a sensor that monitors the temperature of the coolant and thus controls its activation. The valve is located on the side of the engine block, just below the vacuum pump. First, remove the plate that supports the electrical cables, disconnect the hoses, the sensor connector, and unscrew the fixing bolts to remove it.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Thermostat from a Fiat Punto
Removing the Thermostat from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see how to remove the thermostat from a Fiat Punto. First, lift the vehicle and, using a 13 mm spanner, open the …
How to Replace the Thermostat on a Fiat Punto 2 Series 8v
How to Replace the Thermostat on a Fiat Punto 2 Series 8v
Fiat Punto (1999-2011 / MK 2, 188) When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly und…
Replacement of Thermostat
Replacement of Thermostat
Fiat Punto (1999-2011 / MK 2, 188) The thermostat is located on the side of the engine, just below the distributor. To replace it, it is advisable to perform the repair when the engine…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos