Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the "Follow Me" Function on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, learn how to activate the "follow me" function, which keeps the headlights of your vehicle on for a short time, allowing you to reach your front door illuminated by the lights. This is the intended purpose of the function.

To activate it, turn off the engine and press the main beam function: each press gives the function an input of 30 seconds. The more times you press it, the longer the function stays on, up to a maximum of 210 seconds, which is 3.5 minutes.

To deactivate the function, pull the lever towards you for a couple of seconds.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today’s steps will show you how to activate the automatic door locking on a Fiat Grande Punto, as well as the Punto Evo. First, get inside the vehicl…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The following steps will show you how to activate and connect the Bluetooth system on a Fiat Grande Punto, as well as on the Punto Evo. First, get in…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos