Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
Epoca
- Years 1957-1975 To remove the door from the car structure, we need to unscrew the four bolts on the hinge, and then the hinge itself, in the middle of the door. In the example we see, the cover is missing on the hinge hole, which is composed of a Teflon washer that slides inside the U-shaped bent iron to allow the door to open and close, and is held in place by a screw. The cap would serve to cover the access to this screw. Since it is a spring, we need to remove it from its housing. Consequently, after unscrewing the four bolts, the door also comes off. Really very simple.
Posted on 5 July 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |