|
Do it yourself
| |||
| ||||
How to Resolve the Yellow Warning Light Issue on a Fiat Punto Evo
Model: Fiat Punto
MK 3, Punto EVO, 199, Grandepunto
- Years 2005-2018
In this video, we see how to resolve the yellow warning light issue on a Fiat Punto Evo multipower running on methane. The engine light remains on despite the YouTuber attempting to reset the light by clearing the error via the OBD port, but upon restarting the car, the light comes back on. This corresponds to error P0191, which relates to the pressure sensor; indeed, the vehicle cannot switch from petrol to methane fuel. Therefore, you need to identify the pressure sensor, remove it, clean it, and see what happens. The sensor is located on the left side of the filter box, at the bottom, inserted within the intake manifold. First, unplug the connector, then remove the side Torx 25 screw and gently pull out the sensor. Do not touch it with your hands! (the YouTuber shows how to do this) and clean it with Fulcron and a contact cleaner spray. Wait for it to dry, clean the connector as well, and reassemble. The light has turned off and the vehicle switches to methane.
Updated on 5 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
The cancheck on the radios of a Fiat Grande Punto is an important security system to prevent theft and ensure the correct functioning of the car radi…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Below are the steps to reset the airbag light on the Fiat Punto Evo, as well as the Grande Punto and other models from the manufacturer. First, ensur…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In this video, see how to resolve the annoying issue of the seatbelt sensor on the Fiat Grande Punto that keeps sounding. The problem usually relates…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |