Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Belt on a Fiat Seicento?

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: V-belt

Video tutorial

In this tutorial, you will see how to replace the alternator belt on a Fiat Seicento, a straightforward task if you have good manual skills. First, lift the front right side with a jack, taking the necessary safety precautions.

Then, remove both the wheel and the wheel arch liner. Next, locate the belt in question, loosen the three mounting bolts of the alternator with a 16mm spanner and another 17mm spanner, and move it slightly to release the belt.

Finally, position the replacement, tighten each bolt, and reassemble everything.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt of the Fiat Seicento
How to Replace the Timing Belt of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) The main instructions in this guide will illustrate the procedure for removing and replacing the timing belt and the water pump of the Fiat Seicento.…
How to Replace the Timing Belt on a Fiat Seicento
How to Replace the Timing Belt on a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) To replace the timing belt on a Fiat Seicento, open the bonnet to access the left side of the engine block. You will also need to remove the right fr…
How to Remove the Door Panel from a Fiat Seicento
How to Remove the Door Panel from a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before you can start, open the door of your Fiat Seicento. Begin by unscrewing and removing the screws that secure the door panel to the door itself.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos