Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror of the Fiat Fiorino

Model: Fiat Fiorino MK 2 - Years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Side mirror

See other generations:
Video tutorial

See how to replace an external wing mirror on the Fiat Fiorino. Gather plastic levers to avoid scratching the bodywork; if you don't have them, a flat screwdriver wrapped in insulating tape will do. Using your tool, remove the plastic triangle housing the small speaker and the lever that adjusts the mirror by prying at the edge.

Once detached, disconnect the electrical connector and remove the lever. Using a T50 Torx key, unscrew the three screws holding the mirror structure so you can take it off. Position the new mirror, threading the adjustment cables through its hole, secure the three screws, connect the speaker connector, insert the lever back into its place, and replace the plastic triangle in its housing on the door.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on the Fiat Fiorino Van
How to Replace the External Wing Mirror on the Fiat Fiorino Van
Fiat Fiorino (2007-2026 / MK 3) In this tutorial, you will learn how to replace the external wing mirror on the Fiat Fiorino van, a very simple and quick operation. First, open the …
How to Replace the Exterior Mirror on a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) How do you replace the exterior mirror on a Fiat Fiorino? In this video, learn how to proceed. Use a plastic or rubber-coated spatula to pry between …
How to Replace the Key Battery in the Fiat Fiorino 3
How to Replace the Key Battery in the Fiat Fiorino 3
Fiat Fiorino (2007-2026 / MK 3) Among the maintenance tasks you can easily perform at any time is replacing the button battery inside your Fiat Fiorino Mk3 key (2007-2022). Here’s h…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos