Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

Today, I will explain how to perform a diagnostic check on a 2009 Fiat Ducato. The procedure is very simple; first, start the vehicle's instrument cluster and then connect the diagnostic computer through the OBD port. Once the computer is connected, it will analyse the vehicle's warning light system, identifying any error lights. Once the error is found via a code, you can proceed to remove it using the computer or manually. In this case, we will use the computer. Select the error and proceed to reset it. Once completed, disconnect the computer and turn off the vehicle.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) On the Fiat Ducato, to reset the Service light, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once…
Resetting the Service Light on the Fiat Ducato
Resetting the Service Light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This brief and simple guide shows you how to reset the service light for the routine maintenance oil change on the Fiat Ducato using diagnostic softw…
How to reset the Service light on the Fiat Ducato?
How to reset the Service light on the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To reset the Service light on the Fiat Ducato, insert the ignition key into the ignition switch and turn it to activate the instrument cluster. Once …

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos