Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Replace the EGR Valve on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: EGR valve

See other generations:
Video tutorial

The EGR valve functions to reintroduce a portion of the exhaust gases back into the intake to reduce emissions. Constant contact with exhaust gases, often contaminated by oil leaks and unburnt diesel, tends to dirty it to the point of completely clogging it and causing it to jam. It is not easy to determine when the valve should be replaced, as it is not so much related to mileage but rather to driving style and the type of journey.

If you drive a lot in the city, the valve will tend to clog prematurely. Therefore, it is advisable to clean both the valve and the intake manifold during routine maintenance.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Clean the EGR Valve on Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the EGR valve from the Grande Punto? Start by lifting the bonnet that covers the engine and locating the EGR valve. Remove the engine …
How to Replace the EGR Valve on a Fiat Punto 1.3 Diesel
How to Replace the EGR Valve on a Fiat Punto 1.3 Diesel
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to remove the EGR valve from a Grande Punto diesel. The EGR valve is a very delicate component in cars as it helps li…
When to Change the EGR Valve on a Fiat Grande Punto
When to Change the EGR Valve on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The function of the EGR valve is to reintroduce a portion of the exhaust gases back into the intake to allow for post-combustion and reduce emissions…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the EGR valve located on a Fiat Punto 1.3 multijet? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos