Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the EGR valve of a Fiat Punto 1.3 diesel

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: EGR valve
Operation: How to replace the EGR valve of a Fiat Punto 1.3 diesel

In this video we will see how to disassemble the EGR valve of a diesel Grande Punto. The EGR valve is a very delicate element of cars as it limits the release of polluting substances into the environment, especially nitrogen oxides. As a first step, with the car off, open the engine compartment and remove the central engine tunnel, now it will be possible to see the EGR valve. Once equipped with a socket wrench, proceed to unscrew the pin bolts of the valve block, once removed, remove the valve delicately. Possibly insert a new Egr valve or clean it. The engine cover can now be refitted.


Posted on 7 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the EGR valve on the Fiat Punto Evo 1.3 multijet cost? Read Answer
    • Punto 2005-2018 - What is the price of the EGR valve on the 90 hp Fiat Grande Punto 1.3 multijet? Read Answer
    • Punto 2005-2018 - How much does the EGR valve cost for the Fiat Punto Multijet? Read Answer
    • Punto 2005-2018 - Where is the EGR valve located in the Fiat Punto 1.3 multijet? Read Answer
    • Punto 1999-2011 - What is the price of the EGR valve of the Fiat Punto with 1.3 MultiJet engine? Read Answer
    • Punto 2005-2018 - In what position is the EGR valve of the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the EGR valve on the Fiat Punto 1.3 MultiJet? Read Answer
    • Punto 2005-2018 - How much does the EGR valve cost on a Fiat Punto 1.3 Multi-Jet? Read Answer
    • Punto 2005-2018 - Where is the EGR valve located on a Fiat Punto 1.3 multijet? Read Answer
    • Punto 1999-2011 - Where is the erg valve located in the Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos