Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Radio Power Button on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Car stereo

Following the instructions from our YouTuber, learn how to install a radio power button (single or double DIN) that allows you to turn off the radio, ensuring you don't drain the battery and that the radio settings won't reset. The video refers to a Fiat Panda version 169 but is applicable to any vehicle you wish to work on. You need to remove the radio and locate the grey cable connected to the positive red battery terminal. The yellow cable goes directly to the positive red battery terminal. The second grey cable connects directly to the ISO connector of the radio, positive red. Our YouTuber has also prepared a simple diagram that clearly shows the connections and the colours of the cables to use.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Fiat Panda
How to Remove the Radio from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you remove the radio from your car? Let's look at removing the radio and installing a new one in a Panda. Insert the keys into the holes on th…
How to replace the car radio in the Fiat Panda
How to replace the car radio in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the Fiat Panda car radio is a simple and quick operation to be carried out independently. To perform the replacement, we need to remove the…
How to connect your smartphone to the Bluetooth radio of the Fiat Panda?
How to connect your smartphone to the Bluetooth radio of the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To connect your smartphone to the Bluetooth radio of the Fiat Panda, turn on the instrument cluster by turning the key: this will allow you to naviga…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos