Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Rear Light Bulb

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

To replace the bulb of the rear light on your car, first, use some plastic tools to avoid damaging the bodywork when removing the plastic trim under the headlamp. Once the piece is opened, disconnect the connectors and wires. At the bottom of the light, on the back, there is a knob that needs to be unscrewed. Therefore, without forcing anything, unscrew this knob completely. Once finished, gently pull the upper part (the longer one) of the light from the front, and simultaneously, the lower part.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to replace the bulb of the right rear headlight on the Fiat 500
How to replace the bulb of the right rear headlight on the Fiat 500
Fiat 500 (2020-2026 / 500 E, 332) Replace the rear headlight bulb of a Fiat 500e vehicle. Follow simple and quick steps to do it yourself. To replace the bulb, it is necessary to remo…
How to Replace the Rear Light Bulb in a Fiat 500 L
How to Replace the Rear Light Bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Open the boot of the Fiat 500 L to replace the rear light bulb. Remove the internal side plastic cover of the light to disconnect the connector and u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos