Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Wheel Bearings

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Bearing

See other generations:
Video tutorial

This guide explains how to change your car's wheel bearing without needing to take it to a mechanic, saving you some money. Wheel bearings are spherical and relate to the car's suspension, located on the drum or brake disc, which helps reduce friction when the vehicle is in motion.

When starting the replacement, loosen and then remove the wheel bolts, lifting the wheel with the aid of a jack. Next, unscrew the bolts and remove the wheel, and also detach the brake caliper using a socket wrench or screwdriver.

Once the caliper is removed, take off the metal cap. Inside, you will find the retaining clip that needs to be unscrewed with a pair of pliers. Once this is done, you can install the new wheel bearings.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Removing Wheel from Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to change a punctured wheel with a spare wheel. First, ensure you always have a jack to lift the car, a wh…
Replacing Brake Pads on Fiat Punto mk2
Replacing Brake Pads on Fiat Punto mk2
Fiat Punto (1999-2011 / MK 2, 188) Loosen the wheel bolts of the affected wheel, lift the car, and completely unscrew them to remove the wheel. Once done, clean the fastening elements …
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
Fiat Punto (1999-2011 / MK 2, 188) When your car has covered many miles, it may be necessary to replace the shock absorbers, which serve to dampen the car's bumps and ensure safety whi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos