Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Fiat Panda Hybrid

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Clock

In this video, you will learn how to set the time on a Fiat Panda Hybrid. Start by pressing "set" on the central console, below the central screen, but the time is displayed on the instrument panel, and that is where you will need to operate. Using the two buttons on either side of the "set" button on the central console (which also have up and down arrows), navigate to the "set time" menu. To confirm that you want to enter that submenu, press "set" again, and once more to reach the time. The hour will start to flash. Use the up and down arrows to adjust the hour. Confirm with "set" and move on to the minutes, confirming again with "set". From here, you can also adjust the date using the same procedure.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How does the Fiat Panda Hybrid work?
How does the Fiat Panda Hybrid work?
Fiat Panda (2012-2023 / ) The Fiat Panda Hybrid is equipped with the classic gasoline engine, which is supported during acceleration phases by an electric motor paired with it…
How does the hybrid engine of the Fiat Panda Hybrid work?
How does the hybrid engine of the Fiat Panda Hybrid work?
Fiat Panda (2012-2026 / 319, MK 3) The explanation provided here is aimed at the technology that allows the use of the Fiat Panda Hybrid, visible in the video, clarifying how this tech…
How do you set the time on the Fiat Panda?
How do you set the time on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) It is not uncommon for the clock of a car, in this specific case the Fiat Panda shown in the uploaded video, to be reset by disconnecting the battery…

    Frequently Asked Questions

    • Panda 2012-2021 - How to set the time in the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos