Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Clock

To set the clock on a Fiat Panda, turn the ignition key in the ignition switch to power up the instrument cluster. Then, access the relevant menu by pressing the MODE button located to the right of the cluster. You can now scroll using the arrows above and below the MODE button and press it again to select the clock option. The hours will start to flash and can now be adjusted using the arrow buttons. Once the hours are modified, confirm the entry by pressing MODE, and then follow the same procedure to adjust the minutes.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Fiat Panda?
How do you set the clock on the Fiat Panda?
Fiat Panda (2012-2023 / ) To adjust the clock of the Fiat Panda, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once it is…
How do you set the time on the Fiat Panda?
How do you set the time on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) It is not uncommon for the clock of a car, in this specific case the Fiat Panda shown in the uploaded video, to be reset by disconnecting the battery…
How do you set the clock on the Fiat Panda?
How do you set the clock on the Fiat Panda?
Fiat Panda (2012-2023 / ) In order to adjust the clock that appears on the instrument panel of the Fiat Panda, you will need to turn it on by inserting the ignition key into t…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - How to set the time in the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos