Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob of the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Transmission

Changing the gear knob of the Fiat Panda is a very simple task that you can carry out independently, thanks to this brief video tutorial. The first step is to engage the handbrake to secure the car and place the gearbox in neutral. Next, hold the gear lever steady with one hand and rotate the knob clockwise and then counterclockwise, pulling upwards firmly. Now you can remove the gaiter or perform other tasks. To refit the knob, insert it into the metal tube and push down firmly while holding the gearbox steady.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…
How to replace the gear knob and gear lever gaiter of the Fiat Panda
How to replace the gear knob and gear lever gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do if the gearbox is noisy in the Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos