Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn on the Air Conditioning in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Turning on the air conditioning in a Fiat Panda with manual climate control is very simple. In older models, the system is not always digital and fully electronic, as is the case with this 2006 Panda shown in the video.

To turn on the air conditioning, simply start the car and turn the dial on the central dashboard below the radio to the right, moving from 0 to 2 or 4, depending on your preferred temperature. Finally, press the lever that will illuminate, activating the air conditioning.

To turn it off, perform the same operation in reverse.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Fiat Panda Air Conditioning: User Guide
Fiat Panda Air Conditioning: User Guide
Fiat Panda (2003-2012 / 169, MK 2) If you have just purchased a Fiat Panda and do not know how to use the air conditioning, do not worry as it is very simple and you just need to follo…
Removing the Heating Control Knobs on a Fiat Panda
Removing the Heating Control Knobs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the bulbs for the manual air conditioning control knobs on a Fiat Panda? In this video, see how to proceed. Disconnect the air conditio…
How to Remove the Air Vent Knobs on a Fiat Panda
How to Remove the Air Vent Knobs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you change the bulbs or LEDs for the illumination of the manual air conditioning knobs on a Fiat Panda? Follow this guide. Remove the air vent…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Open the Bonnet of the Renault Kangoo

In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this. He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver. Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open. In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid.

Watch the video!


by ScegliAuto

More videos