Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Window Regulator

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Power window motor

To remove the manual window regulator from the 2010 Fiat Grande Punto, you must first remove the door panel. The process is straightforward and easy to perform on all four doors of the vehicle. Start by removing the screws from the handle and then the handle itself. Next, remove the remaining screws from the panel, working from the bottom to the top. Also, remove the central screws and detach the cover by hand, being careful not to damage the clips. Disconnect the cables from the handle and then from the window regulator. To remove the latter, it will be necessary to take off the hard plastic cover using a screwdriver.

Updated on 1 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to change or repair the power window motor of the Fiat Grande Punto
How to change or repair the power window motor of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's video tutorial will show us how to disassemble and repair (or replace) the window regulator motor of the Fiat Grande Punto, as well as the Pu…
Replacement of the window regulator mechanism of the Fiat Punto Evo.
Replacement of the window regulator mechanism of the Fiat Punto Evo.
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today we will discover the instructions that will allow us to disassemble and replace the window motor of the Fiat Punto Evo. First of all, we open t…
Window Regulator Motor Replacement
Window Regulator Motor Replacement
Fiat Punto (1999-2011 / MK 2, 188) To remove the window regulator motor, first remove the door panel: this operation is extremely simple as there are only a few fixing screws and some …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos