Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Starter motor

See other generations:
Video tutorial

If turning the ignition key to the on position does not activate the starter motor, there may be a fault related to the relay, brushes, armature, or the pinion engagement mechanism. You need to remove the starter motor itself and work on it to repair it. The starter motor is located on the gearbox, and before proceeding with the replacement, disconnect the battery.

Then, unscrew the mounting bolts securing the starter motor to the gearbox and disconnect the power cables. Once on the workbench, open it up and inspect the collector, brushes, and if necessary, restore the wiring as needed.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor in a Fiat Panda?
How to Replace the Starter Motor in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will see how to replace the starter motor in a Fiat Panda, a simple operation but one that requires good manual skills. First, …
How to Remove the Starter Motor on a Fiat Panda
How to Remove the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Learn how to remove the starter motor on a Fiat Panda. After lifting the front bonnet and securing it, disconnect the power terminals of the starter …
How to Replace the Starter Motor on a Fiat Panda?
How to Replace the Starter Motor on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the starter motor on a Fiat Panda, open the bonnet to access the components in the engine bay. First, loosen the bolts securing the batter…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos