Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Wind the Key Spring on the Fiat 500 Remote

Model: Fiat 500 - Years 2007-2022
Part: Key

In this short video, you will see how to easily wind the key spring on the remote of a Fiat 500 if the key no longer comes out of its housing. It is very simple and accessible to everyone. Using a small screwdriver or a coin, open the casing of the key and lift the spring catch located at the top of the key. Remove it from its housing in the key by lowering it slightly and make a complete clockwise turn with the key, passing it over the spring itself. Now reattach the spring catch to the key, which is now wound. Finally, reassemble the key casing and the job is done.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …
How to replace the battery of the Fiat 500 X key
How to replace the battery of the Fiat 500 X key
Fiat 500 (2014-2022 / 500 X) Replacing the remote control battery of a Fiat 500 X is a really simple and quick operation to perform in a few steps; the battery we will use is the…
How to replace the battery of the Fiat 500 X remote control
How to replace the battery of the Fiat 500 X remote control
Fiat 500 (2014-2022 / 500 X) When the key of a vehicle stops working, we need to replace the battery. The steps to replace the battery of the Fiat 500 X remote control are: - Ins…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos