Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield wipers

This useful video tutorial explains, simply and quickly, the entire procedure necessary to replace the wiper blades on your Fiat Panda, model 169 produced from 2003 to 2012. To replace the old wiper blade, first remove it by pressing the clips on the sides and then lifting it. Next, raise the wiper arm to slide off the wiper blade itself. Proceed with the replacement by inserting a new one, following the reverse procedure. Finally, to complete the job, repeat the same operation on the second wiper blade.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…
How to Replace the Wiper Blades on the Fiat Panda?
How to Replace the Wiper Blades on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the wiper blades on the Fiat Panda, press the hook that secures the blade to its arm and remove the blade itself. To fit the new blade, si…
How to Replace the Front Wipers on the Fiat Panda
How to Replace the Front Wipers on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below are the instructions that will allow you to remove and replace the front wipers on the Fiat Panda. First, move to the front of the vehicle and …

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos