Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Windscreen Wiper Motor from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield wipers

Start by opening the bonnet of your Fiat Panda. Then, remove the front wipers by unscrewing their mounting bolts. Once done, unscrew the screws and bolts securing the motor cover to the engine bay, then remove the cover itself to access the wiper motor. Proceed by unscrewing and removing the bolts that secure the motor to its housing, then disconnect the electrical connector. Once the electrical connector is disconnected, you can remove the front wiper motor from your Fiat Panda, completing the disassembly.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers on the Fiat Panda
How to Replace the Front Wipers on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below are the instructions that will allow you to remove and replace the front wipers on the Fiat Panda. First, move to the front of the vehicle and …
How to Replace the Wiper Blades on the Fiat Panda?
How to Replace the Wiper Blades on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the wiper blades on the Fiat Panda, press the hook that secures the blade to its arm and remove the blade itself. To fit the new blade, si…
How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos