Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil Filter on a Fiat Idea Diesel

Model: Fiat Idea MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

Video tutorial

The oil filter on this model equipped with the 1.3 MultiJet engine is of the cartridge type and is located at the front left (when viewed from the front) of the engine bay, right next to the yellow engine oil filler cap. To replace it, first remove the air intake hose that passes directly over the filter's location.

Next, remove the metal protection shield applied over the filter cap, then unscrew the cap and extract the filter cartridge.

Remove the old cartridge and install the new one along with the O-ring seals, which should be coated with clean oil before reattaching the filter cap.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Fiat Idea (2003-2016 / MK 1) Follow these steps to remove and replace the diesel filter on Fiat Idea 1300 MultiJet. First, lift the bonnet and secure it. Once you locate the fuel…
Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
Fiat Idea (2003-2016 / MK 1) In this mini guide dedicated to your Fiat Idea Mk2, we will discover where the fuse box is located. Before starting, remember that any replacement or…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos