Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Cabin air filter

In this short video tutorial, see how to replace the cabin air filter on a second-generation Fiat Punto, produced from 1999 to 2011. The filter is located under the dashboard on the passenger side, as shown in the video. To remove the old filter, unscrew the two screws of its cover and then extract it along with its guide. Once done, insert a new cabin filter, ensuring it is fitted the correct way, and finally replace the plastic cover to complete the job.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Fiat Punto (1999-2011 / MK 2, 188) Below are the necessary instructions to remove and replace the diesel filter on the Fiat Punto 1.3 Multijet. First, open the bonnet of your car and s…
Replacing the Washer Pump of a Fiat Grande Punto
Replacing the Washer Pump of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's guide will show you the main instructions for removing and replacing the washer pump of a Fiat Grande Punto. First, locate the washer pump, w…
How to Replace the Cabin Filter on a Fiat Grande Punto Evo
How to Replace the Cabin Filter on a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see how to replace the cabin filter on a Fiat Grande Punto Evo by following some simple steps: First, purchase a new…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos