Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the knob to operate the fan in the Fiat Ducato

Fiat Ducato - Video tutorial

Model: Fiat Ducato - Years 2002-2006
Part: Interior blower
Operation: How to remove the knob to operate the fan in the Fiat Ducato

To remove the knob that allows you to operate the fan inside the Fiat Ducato passenger compartment, it is advisable to first remove the plastic dashboard that houses the air knobs themselves. To do this we must, first of all, disassemble the car radio. Once this operation has been carried out, we proceed to disassemble the dashboard by unscrewing the two upper screws and the two lower screws that lock it in place. At this point we proceed to disconnect the various wires for the electrical connections. Now let's turn the dashboard and identify the method of assembly of the knob that interests us and proceed to disassemble it.


Posted on 17 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Ducato 2014-2023 - Why is the cabin fan of the Fiat Ducato not working? Read Answer
    • Ducato 2006-2014 - Where is the air conditioning fan located in the Fiat Ducato x 250? Read Answer
    • Ducato 2006-2014 - What causes the problem with the Fiat Ducato cabin fan? Read Answer
    • Ducato 2006-2014 - Why does the passenger compartment air fan of the Fiat Ducato not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos