Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the heating knob of a Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Checks and maintenance

To remove the heating knob of a Fiat Ducato, start by removing the decorative panel around the central console, using a plastic lever to avoid damage. Then, firmly grip the knob and pull outward with rotating movements until it detaches from the control shaft. Be careful not to force it excessively to avoid damage to the console or the underlying mechanism. With the knob removed, you will be able to access the underlying components for any necessary repairs or replacements. To reinstall the knob, simply follow the reverse steps, and slide the knob back into its original position on the dashboard.

Posted on 13 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Glow Plugs from a Fiat Ducato
Removing the Glow Plugs from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Remove the glow plugs from a Fiat Ducato. Watch this detailed video on how to proceed with the removal. Pull the engine compartment release lever loc…
Guide to Replacing the Heater Radiator on the Fiat Ducato
Guide to Replacing the Heater Radiator on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This guide provides instructions for removing and replacing the heater radiator in the Fiat Ducato's cabin. First, get inside the vehicle and start b…
How to Replace the Heating Radiator of a Fiat Ducato
How to Replace the Heating Radiator of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. Start by disconnecting the two hoses that lead to the heating radiator, located near the fire …

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos