Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Does the Radiator Fan Work on the Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Checks and maintenance

The radiator fan on the Fiat Ducato activates whenever the engine temperature becomes too high, and the fan must operate to lower it. The fan's operation is controlled by a relay located inside the engine bay, right above the fan. If the fan's operation is compromised, it may be due to damage to this relay. Additionally, check that all power cables to the fan are intact; these can be found not only in the engine bay but also behind the panel located under the steering column.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heating Radiator of a Fiat Ducato
How to Replace the Heating Radiator of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. Start by disconnecting the two hoses that lead to the heating radiator, located near the fire …
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) This guide will show you how to disassemble and replace the cabin fan resistor on a Fiat Ducato in simple steps. First, get inside the vehicle and st…
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Instructions for Removing the Heater Radiator on Fiat Ducato 3
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to remove the heater radiator from a third-generation Fiat Ducato, following these main instructions. Firs…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos