Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Battery

If the yellow triangle indicating a generic fault lights up on the instrument panel and the light on the console indicates that the start&stop function is disabled, it means the battery is no longer sufficiently charged or has lost efficiency. You need to replace the battery, and when dealing with start&stop, you should choose a quality product. Open the bonnet and locate the battery. Disconnect the terminals, then remove the fixing nut of the bracket that holds the anchoring strap. Remove the old battery and proceed in reverse for the installation of the new one.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Battery on a Fiat Punto Evo
How to Replace the Engine Battery on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How do you replace the engine battery on a Fiat Punto Evo? This guide explains how to carry out the replacement: open the car door and pull up the en…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…
Replacing Speakers on the Fiat Grande Punto - Punto Evo
Replacing Speakers on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, follow the instructions on how to remove and replace the front speakers on the Fiat Grande Punto, as well as the Punto Evo. First, open the fr…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos