Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Lights and Installing the Camera on the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Interior dome light bulb

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the cabin lights and install the camera on the Fiat Ducato. First, get inside the vehicle and start removing the plastic ceiling light by prying on the sides; then disconnect the electrical connector of the lights, as shown in the video.

At this point, replace the lights if necessary and prepare for the installation of the camera by performing the electrical wiring; finally, reassemble the ceiling light and check the camera's operation!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Camera on the Fiat Ducato
How to Replace the Rear Camera on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) To replace the rear camera on the Fiat Ducato, loosen the screws securing the third brake light to its housing. Once these screws are loosened, you c…
How to Replace the Headlight Switch on the Fiat Ducato
How to Replace the Headlight Switch on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) The steps illustrated in this guide will show you how to disassemble and replace the headlight switch on the Fiat Ducato. First, get inside the vehic…
Removing the Headlight Bulb on a Fiat Ducato, Dodge RAM Promaster
Removing the Headlight Bulb on a Fiat Ducato, Dodge RAM Promaster
Fiat Ducato (2014-2026 / X290) In this quick and simple tutorial, you will learn how to remove the dipped beam bulb from a Fiat Ducato. First, open the bonnet and unscrew the hand-…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos