Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear camera of the Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Checks and maintenance

In order to replace the rear camera of the Fiat Ducato, you need to loosen the screws that secure the third brake light to its housing: once these screws are loosened, it will be possible to completely detach the spotlight from its seat, disconnecting the connector at the back. At the center of this headlight, you will be able to locate the rear camera, which can be removed from its seat; at this point, you can insert the new rear camera inside the rear light, so that the latter is then fixed to its housing and connected to the appropriate connectors.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Lights and Installing the Camera on the Fiat Ducato
Removing the Cabin Lights and Installing the Camera on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this guide, you will find instructions to remove and replace the cabin lights and install the camera on the Fiat Ducato. First, get inside the veh…
How to Remove the Airbag from a Fiat Ducato
How to Remove the Airbag from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you start, to work safely, disconnect the battery of your Fiat Ducato. Begin by sitting in the driver's seat. Next, unscrew and remove the scr…
Replacing the Rear Door Lock on Fiat Ducato Camper
Replacing the Rear Door Lock on Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) Today we will discover the instructions that will allow us to replace the lock on the rear doors of the Fiat Ducato Camper. First, open the rear door…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos