Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlight Bulb on a Fiat Ducato, Dodge RAM Promaster

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

In this quick and simple tutorial, you will learn how to remove the dipped beam bulb from a Fiat Ducato. First, open the bonnet and unscrew the hand-tight screws of the triangular body mount on the affected side.

Then, unscrew the screw of the plastic cover located under the headlight, as shown in the video. Below, you will find all the screws for removing the headlight: unscrew them and take it out, disconnecting the various light connectors.

At this point, remove the protective cover of the lights and release the bulb by pressing the clip with a screwdriver!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to repair the instrument panel of the Fiat Ducato dashboard
How to repair the instrument panel of the Fiat Ducato dashboard
Fiat Ducato (2014-2026 / X290) In this guide we will see the instructions that will allow us to repair the instrument panel of the Fiat Ducato dashboard, but also of the Peugeot Bo…
How to repair and adjust the handbrake of the Fiat Ducato
How to repair and adjust the handbrake of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today we will discover the instructions that will allow us to disassemble and repair the handbrake of the Fiat Ducato, as well as the RAM Promaster, …
How to Replace the Headlight Bulb on a Fiat Ducato
How to Replace the Headlight Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) Before you can start, open the bonnet of your Fiat Ducato. Begin by unscrewing and removing the screws that secure the headlight to the van. Next, un…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos