Do it yourself
Frequently asked questions about cars and motorcycles

How to Lower the Rear Seats of a Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Let’s briefly go through the instructions needed to lower the rear seats of a Fiat 500 in simple and quick steps. To access the rear seats more easily, open the boot lid; then lower the headrest and remove the small shelf in the boot, as shown in the video.

Now, press the side button to release the seat mechanism so that you can lower it; this will increase the boot's load volume. Finally, reposition the seat back to its original position by applying the reverse procedure!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Fiat 500 (2012-2023 / 500 L) Before you can start, open the boot of your Fiat 500 and remove the boot carpet. This will give you access to the bolts securing the rear seat backre…
Fiat 500 (1957-1975 / Epoca) Before you begin, enter the interior of your Fiat 500. Start by removing the lower seat of the rear seats by simply unhooking and pulling it out. Nex…
Fiat 500 (2014-2022 / 500 X) Let's see how to fold down and remove the rear seats to create space in the boot of a Fiat 500L. First, press the lever located on the back of the se…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos