Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Replacing the Gear Knob on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Shift knob

See other generations:
Video tutorial

This guide briefly outlines the step-by-step instructions to remove and replace the gear knob on a Fiat Tipo. First, get into the vehicle and start by removing the small plastic cover of the knob, where the gears are printed; to do this, use a very thin plastic lever, as shown in the video.

Next, use a socket wrench with an extension to unscrew the fastening screw of the gear knob, allowing you to remove it from the lever; replace it with the new one and secure it correctly in the upright position.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Replacing the Gear Lever Gaiter on the Fiat Tipo 356
Replacing the Gear Lever Gaiter on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 358, 356, 357) The gear lever gaiter on the Fiat Tipo can deteriorate over time and may require replacement. To do this, sit in the driver's seat, use your fingers …
How to replace the gear gaiter on the Fiat Tipo
How to replace the gear gaiter on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) To replace the gear gaiter on the Fiat Tipo, unclip the gaiter button, detach the plastic, and lift the old gaiter. Once the old gaiter is removed, u…
How to Set the Time on a Fiat Tipo
How to Set the Time on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Today's step-by-step instructions will show you how to adjust the time on the Fiat Tipo's instrument panel. First, get in the vehicle and turn on the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos