Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Open the door and observe that there are two caps on the side of the panel. Remove them using a lever tool.

Now, remove the knob located on the handle by inserting a thin file to release the clips at the back. Next, remove the panel from the small storage compartment on the armrest.

You can now start removing all the bolts in the areas exposed by the caps and panels. Now, simply lift the panel from the bottom, and once detached, be careful to disconnect all cables and connectors attached.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2021 / 312) Before you start, open the door of your Fiat 500. Begin by prising off and removing the frame of the internal door handle. Next, remove the inserts f…
Fiat 500 (1957-1975 / Epoca) Removing the door panel of a Fiat 500 (old model). Use a screwdriver to unscrew the securing screws located in the handle, remove the window winder a…
Fiat 500 (2014-2022 / 500 X) In this guide, see the steps that will allow you to remove and replace the front door panel on the Fiat 500 X. First, open the front door and start b…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos