Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Service warning light

To reset the service light on a Fiat Panda, you can use a diagnostic computer. All you need to do is connect the diagnostic computer to the vehicle via the OBD port and then follow the system instructions. First, turn on the instrument cluster and then select the year and model of the vehicle from the computer. Next, select the maintenance option and indicate the oil change, set it to "Reset" and wait for the data to load. Once finished, restart the instrument cluster. Turn it off and then back on.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Fiat Panda?
How to Reset the Service Light on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To reset the Service light on the Fiat Panda, connect a diagnostic tool to the OBD port of the vehicle, located at the lower left of the dashboard re…
How to reset the service light (oil change) on the Fiat Panda
How to reset the service light (oil change) on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) After carrying out the routine maintenance service, it will be necessary to reset the service light (engine oil change); let's see the procedure on t…
How to reset the oil service light in a Fiat Panda?
How to reset the oil service light in a Fiat Panda?
Fiat Panda (2012-2021 / ) In this video, you can see how to reset the service light in the Fiat Panda, a very simple operation to follow only after performing the required mai…

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos