Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
This video is currently unavailable

Open and lift the boot lid, and remove the two screws located on the edge of the boot that secure the rear light. Now you can simply pull the light outwards without removing it completely.

To fully extract it, you need to lever on the opposite side to detach the two clips that hold the entire light assembly. Now you can completely remove it and disconnect the connector.

Next, unscrew the screws that secure the rear panel of the light covering the bulb positions. Carry out the necessary maintenance and retrace the steps to reassemble everything.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …
Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…
Removing a Rear Light from Your Fiat Grande Punto
Removing a Rear Light from Your Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing a rear light from your Fiat Grande Punto? Watch this video to learn how to replace damaged bulbs. Open the boot lid, and using a screwdriver…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos