Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the Fiat Panda spark plugs

Fiat Panda - Video tutorial

Model: Fiat Panda MK 3, 319 - Years 2012-2023
Part: Spark plugs
Operation: How to replace the Fiat Panda spark plugs

Open and lift the hood, then remove the bolts securing the panel that covers the engine and the tube located at the lower right of the engine, now remove the tie at the lower left and lift the cover paying attention to the two tubes. Remove the bolts that lock the two blocks in the center of the engine, then pull them upwards, in this way by taking a long enough wrench you can remove the spark plugs located on the bottom of these two cylinders that you have just released. Make any necessary replacements and go back through the steps for reassembly.


Posted on 21 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2021 - How to replace the spark plugs in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How often are the spark plugs on the Fiat Panda natural power changed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos