Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin air filter of the 2018 Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Cabin air filter

In this article, we will see how to replace the cabin air filter of the 2018 Fiat Tipo. To replace this filter, we should first remove the glove compartment on the passenger side, first removing the fixing pin inside the compartment, then levering on the appropriate pins to extract the compartment. Once the compartment is extracted, you will have access to the filter, remove the protective cover by pressing on the levers and pulling towards you. Once the protective cap is removed, you will have access to the filter and can replace it. Once replaced, reassemble the protective cap and the glove compartment and the procedure will be complete.

Posted on 19 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) In today's video, you will learn how to replace the cabin air filter in the Fiat Tipo. First, open the passenger side door and open the glove compart…
Fiat Tipo (2016-2026 / 356, 357, 358) The cabin air filter on a Fiat Tipo vehicle is located inside the cabin, right behind the passenger side glove compartment. To replace the filter, if…
Fiat Tipo (2016-2026 / 356, 357, 358) In today's tutorial video, you will learn how to replace the cabin air filter on a Fiat Tipo 356 1.6 MultiJet in simple and quick steps. First, locat…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - Where is the cabin filter located in a Fiat Tipo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos