Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the On-Board Clock

Model: Fiat 500 312 - Years 2007-2024
Part: Clock

Adjusting the on-board clock is not difficult; it just requires a bit of attention. Using the buttons on the right side of the dashboard, press the lower "menu" button to enter the main screen. Then press one of the two upper buttons (+ or -) as many times as needed to enter the clock menu (time). The first digit of the clock will flash; use the + and - buttons to set the correct hour. Next, press the "menu" button to make the minute digits flash. Adjust the minutes using the + and - buttons. Proceed by pressing menu to adjust the date. Follow the same steps as above.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Fiat 500 X
How to adjust the clock of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) To set the time and date of the Fiat 500 X, we need to turn on the vehicle's instrument panel and press the settings button, located on the left side…
Guide on Setting the Date and Time on the Fiat 500
Guide on Setting the Date and Time on the Fiat 500
Fiat 500 (2007-2022 / ) This guide outlines the main steps to access the onboard computer menu and modify the date and time on the Fiat 500. First, get in the vehicle and tu…
How to reset the on-board computer of the Fiat 500
How to reset the on-board computer of the Fiat 500
Fiat 500 (2007-2024 / 312) Today we will explain how to perform a reset of the onboard computer on a Fiat 500 car. To perform the reset of the onboard computer, we need to turn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos