Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to replace the air filter of a Fiat Ducato?

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Air filter
Operation: How to replace the air filter of a Fiat Ducato?

To replace the air filter of a Fiat Ducato, open the hood and locate the engine compartment. Find the air filter box, positioned on the side of the engine. Remove the clips and screws that hold the box closed. Open the box and remove the old air filter. Make sure to clean any residue or debris inside the box. Place the new air filter in the box making sure it is oriented correctly. Close the box and reapply the clips or screws to keep it closed. Ensure that the filter is securely in place and that there are no gaps around the edges. Close the hood and check that the filter has been installed correctly. Refer to the owner's manual for further specific instructions and to identify the correct type of air filter for your Fiat Ducato model.


Posted on 4 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos