Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Fiat Doblò MK2

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Tail light bulb

In this video we see how if we notice that one of the rear lights of the Fiat Doblò is burnt out, we must proceed to replace it quickly in order to be able to drive safely. To replace it, we open the rear door, at the location of the light where the bulb to be replaced is located, we unscrew the two torx screws along the drip edge, remove the plastic cover of the rear speaker to access the nut that locks the light, once unscrewed we can remove the headlight, disconnect the connector and place the headlight on a work surface. Unscrew the three screws that secure the plate where the bulbs are housed, replace the burnt out one and reassemble everything by proceeding backwards with the operations.

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light Bulbs for Fiat Doblò
Replacing Rear Light Bulbs for Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video tutorial, learn how to remove and replace the bulbs in the rear light of a second generation Fiat Doblò. First, open the boot door and …
How to Remove the Rear Light of the Fiat Doblò?
How to Remove the Rear Light of the Fiat Doblò?
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Removing the rear light of the Fiat Doblò is a very simple operation. Let's see how to proceed in this tutorial. First, open the tailgate and locate …
Remove a Rear Light from a Fiat Doblo
Remove a Rear Light from a Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Remove a rear light from a Fiat Doblo. In this video, see how to take it off and replace the damaged bulbs. Open the boot lid, and using a screwdrive…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos