Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key shell of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Key

Today's step-by-step instructions will show us how to disassemble and replace the shell of the key fob for the Fiat 500. First, we take our key fob and begin to unscrew the small screw found on the key slot, using a flathead screwdriver; then we pry the sides to open the key fob into two parts, as shown in the video. At this point, we remove the electronic board and the battery, transferring everything to the new key shell; we follow the assembly order of all components, following the video tutorial until the end!

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Fiat 500 electric key
How to replace the battery of the Fiat 500 electric key
Fiat 500 (2020-2026 / 500 E, 332) In this article we will show you how to replace the battery of the electric Fiat 500 key, the procedure requires only a small flathead screwdriver an…
How to replace the key shell of the Fiat 500
How to replace the key shell of the Fiat 500
Fiat 500 (2007-2024 / 312) Today we will see the instructions that will allow us to disassemble and replace the shell of the Fiat 500 key. First, we take our remote control and…
How to Wind the Key Spring on the Fiat 500 Remote
How to Wind the Key Spring on the Fiat 500 Remote
Fiat 500 (2007-2022 / ) In this short video, you will see how to easily wind the key spring on the remote of a Fiat 500 if the key no longer comes out of its housing. It is …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos