Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Proxy Alignment Using Kingbolen on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Onboard computer

See other generations:
Video tutorial

In this video, see how to align the proxy on a Fiat vehicle using the Kingbolen K7 tool, connecting it to the diagnostic socket located on the lower left side of the steering wheel. The device is connected via Bluetooth, of course with the ignition on. You can either perform an automatic scan, allowing the tool to search for the chassis automatically, or manually select the Fiat brand/model (in this case, a Panda 169)/system scan and confirm with OK. Once the scan is complete, select "Body computer Siemens"/OK/specific functions/proxy alignment procedure.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…
How to Replace the Air Filter on a Fiat Panda 169
How to Replace the Air Filter on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this new mini guide dedicated to your Fiat Panda 169, we will describe all the steps to quickly and safely replace the air filter located inside t…
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…

Other guides you may be interested in

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos