Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Panoramic Roof of a Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

Today, let's look at the instructions to open the panoramic roof of a Fiat 500X by following these simple steps. First, get into the vehicle and turn on the instrument panel; then press the panoramic roof opening button located at the top until the roof is fully open, as shown in the video.

At this point, press the button again to close the panoramic roof completely; the same button is present for both the opening and panoramic roofs.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) In this short guide, we will see the instructions that will allow us to open and close the panoramic roof of the Fiat 500. First of all, we get on bo…
Fiat 500 (2007-2024 / 312) Today's instructions will allow us to use and reset the panoramic sunroof of the Fiat 500. First, we get into the car and start the instrument panel;…
Fiat 500 (2014-2022 / 500 X) In this video, we can see how the sunroof of a Fiat 500X works: it consists of two glass panels - equipped with sunshades - of which the rear one is …

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos