Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Doblo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

To reset the service light, related to maintenance, of the Fiat Doblo, we must first turn on the vehicle's instrument panel and then press the accelerator pedal all the way down. While holding down the accelerator pedal, press the brake pedal seven times, wait for the parameters to reset, and turn off the instrument panel. Then restart the vehicle to check if the service light has turned off or not. If the outcome is negative, you can repeat the same process a second time, and if there are further issues, it will be necessary to go to the workshop.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2018 Fiat Doblo
How to Reset the Service Light on a 2018 Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To reset the service light related to the car service on a 2018 Fiat Doblo, follow these simple steps independently. To perform the reset, you need t…
How to Reset the Service Light on a 2023 Fiat Doblo
How to Reset the Service Light on a 2023 Fiat Doblo
Fiat Doblo (2022-2026 / Doblo -3) The following video tutorial shows how to reset the service light related to the car service and engine oil change on a 2023 Fiat Doblo. To perform t…
Reset the Inspection Light on a Fiat Doblò
Reset the Inspection Light on a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's instructions will show you how to reset the inspection light (service) on a Fiat Doblò. First, get into the vehicle and press and hold the ac…

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos