Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Fiat Talento

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Warning light – error code

If the maintenance light on your Fiat Talento's instrument panel continues to remain on even after performing the service, don't worry because you can manually reset the light by following the following procedure. First of all, enter the vehicle and start the instrument panel, then choose one of the two buttons located at the end of the right steering wheel lever and press it several times until the maintenance screen appears on the instrument panel display. Finally, hold down the same button used earlier for about ten seconds and wait for the light to reset.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Talento
How to Reset the Service Light on a Fiat Talento
Fiat Talento (2016-2021 / MK 1) To reset the service light for the Fiat Talento, follow these steps: - Turn on the vehicle's ignition; - Press and hold the SETUP button located on t…
How do you reset the Service light of the Fiat Talento?
How do you reset the Service light of the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To reset the Service light of the Fiat Talento, you will need to turn on the instrument panel, so that you can navigate within the menu that will be …
How to reset the service light on the Fiat Talento.
How to reset the service light on the Fiat Talento.
Fiat Talento (2016-2021 / MK 1) To reset the service light on a Fiat Talento - after completing the services required by the service interval - get into the van, close the doors, an…

Other guides you may be interested in

    Frequently Asked Questions

    • Talento 2016-2021 - Why did the anti-pollution warning light come on in the Fiat Talento? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos