Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the car radio from the Fiat Punto 2006

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car stereo

To remove the factory radio from your 2006 Fiat Punto, follow these steps. First, make sure the car is turned off, then focus on the radio and locate the four holes on both sides. Next, insert metal sticks into the holes and pull the radio towards you. Be careful not to apply too much force to avoid damaging it. Finally, disconnect the electrical cable at the back of the radio and you're done.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the radio, first sit in the driver's seat of your Fiat Punto. Start by inserting the extraction keys into the appropriate holes on the fron…
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see how to remove and replace the factory radio in a Fiat Punto, following the instructions provided below. First, g…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, we will see in this video tutorial how to remove and replace the standard radio of the Fiat Punto Evo, as well as the Grande Punto, installing…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos