Do it yourself
Frequently asked questions about cars and motorcycles

How does the tire monitoring system work on the Fiat 500 E?

Model: Fiat 500 500 E, 332 - Years 2020-2026
Part: Tires

In this video we can see how the Tire Pressure Monitoring System (TPMS) works on the Fiat 500E. It is a preventive safety feature that monitors tire pressure: if it decreases, we will hear an acoustic signal and the light will come on on the display. This means that we need to check which tire needs to be inflated to the correct pressure: this information can be found on the label located on the inner edge of the driver's door. It is necessary to check the pressure even if the light comes on for a few seconds and then goes off. Remember that tire pressure changes with the external temperature, especially in winter. It is important to be aware that the TPMS light does not replace the tire pressure gauge, as it does not automatically turn off when the pressure is restored; but once the pressure has been restored, it will be necessary to drive for a few kilometers, and at a speed higher than 24 km/h.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) In this tutorial, we will briefly explain how the tyre pressure monitoring system works. When the warning light illuminates, it indicates an anomaly …
Fiat 500 (2007-2022 / 312) In this video, find out where the TPMS control unit is located on the Fiat 500: TPMS stands for Tyre Pressure Monitoring System. As the name suggests…
Fiat 500 (2007-2024 / 312) The Fiat 500 uses an indirect tyre pressure monitoring system. This system does not measure the actual pressure with sensors inside the wheels but de…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos