Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Tire pressure monitoring system for Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Tires
Operation: Tire pressure monitoring system for Fiat 500.

The Fiat 500 is equipped with a TPMS system that monitors the tire pressure of the vehicle. Through sensors mounted on the wheels, the pressure of each individual tire is detected, and the data is sent to a system that alerts us with a warning light on the instrument panel and a sound warning in case of low values. On the display, we can check which tire is deflated. We must restore the correct value using the label placed on the inner edge of the driver's side door as a reference. We should remember that the pressure changes with the external temperature and when inflating the tires, we should rely on appropriate equipment rather than the TPMS sensor to determine the correct value. Once the tire is inflated, we should drive for about twenty kilometers to allow the pressure to settle.


Posted on 19 August 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - When does the tire pressure warning light come on in the FIAT 500 L? Read Answer
    • 500 2014-2022 - When does the tire warning light come on in the Fiat 500X? Read Answer
    • 500 2012-2023 - How to reset the tire pressure warning light in Fiat 500? Read Answer
    • 500 2012-2023 - How much do the tires on the Fiat 500L cost? Read Answer
    • 500 2012-2023 - What to do if the Fiat 500L has tire problems? Read Answer
    • 500 2007-2023 - What does the tire pressure warning light mean on Fiat 500 and how to fix it? Read Answer
    • 500 2007-2023 - Yellow warning light with exclamation point on Fiat 500, what does it mean? Read Answer
    • 500 2014-2022 - Tire pressure reset on Fiat 500x? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos